The ESTeem 192C, 192CHP, 192M and 192MHP Series Products have been in production since 1996 (+16 years) and are now at the end of their life cycle due to availability of key parts used in production. Right now we are doing our final build of the 192 Series products so we recommend that you order addition hardware as needed for your site. We will have a reserve supply of parts for repair of the 192 Series for about an addition two years after the end of production. Please review the following information for details.
Kennewick, WA --- January 25, 2013 --- Electronic Systems Technology, Inc. (EST) (OTCQB:ELST), dba ESTeem Wireless Modems, with the cooperative efforts of SDC Engenharia de Sistemas Ltda.,has been granted type acceptance in Brazil on the Model 195Eg-2 and 195Eg-lp-2 modems. SDC Engenhariade Sistemas Ltda. has been an active distributor of ESTeem products in Brazil since 2008.
Kennewick, WA --- December 10, 2012 --- Electronic Systems Technology, Inc. (EST) (OTCQB: ELST), dba ESTeem Wireless Modems, has been granted type acceptance in Canada and by the US Federal Communications Commission (FCC) on their newest licensed narrow band wireless modem; the Model 210C. The ESTeem 210C was designed for the Industrial, Public Safety, and Federal markets operating in the 450 to 470 MHz frequency range with both Ethernet and Serial interfaces. The 210C using Selectable Quadrature Amplitude Modulation allows data rates up to 54 Kbps in the narrow band channels.
Automation Fair 2012, Philadelphia, PA --- November 7, 2012 --- Electronic Systems Technology, Inc. (EST) (OTCQB: ELST) dba ESTeem Wireless Modems (Booth 1300), announces their newest radio to comply with latest Federal Communications Commission (FCC) narrow band licensed standard. The ESTeem 210M was designed for long range and difficult terrain applications the Industrial, Public Safety, and Federal markets. Operating in the 150 to 174 MHz frequency band provides both Ethernet/IP and Serial/DF1 interfaces to industrial automation and control system hardware by using "State of the Art," Selectable Quadrature Amplitude Modulation to provide data rates up to 54 Kbps in the narrow band licensed channels.
ESTeem will be displaying their latest wireless networking hardware at the 2012 Rockwell Automation Fair in Philadelphia, PA on November 7 and 8. This year will mark the 20th anniversary of ESTeem's participation in North America’s premier industrial automation conference and trade show event. ESTeem has been a wireless network solution partner with Rockwell Automation for over 20 years and is looking forward to this year’s show.
The Federal Communications Commission (FCC) has mandated that by January 1, 2013, all licensees and users of radio systems operating in the VHF 150 – 174 MHz and the UHF 450 – 512 MHz portions of the of the radio spectrum, convert their systems and radios so that they are operating on 12.5 kHz rather than the current wideband 25 kHz channels. This mandate has been put into place to bring about spectrum efficiency and as a result, to create additional channels to accommodate the demand of public safety and local government users. The ESTeem Model 192 series of wireless modems is compatible with all narrowband requirements but does require a software update in each wireless modem. To simplify the update process we have put together a complete narrowband update package now available.