The ESTeem Model 195Ep is designed for the rigors of the Industrial, Public Safety and Federal markets with a data rate from 1 to 54 Mbps. With a nominal Line-of-Sight range of 5 to 7 miles you have greater bandwidth for all your application needs, all on one licensed radio frequency that is not in competition with 802.11b,g, and a hardware. Wireless networks over large geographical areas can be a reality using the Model 195Ep in the Access Point modes with the Digi-Repeater feature. The 195Ep can also be configured in the Client mode for long range roaming under an existing 195Ep Access Point canopy.

Features

- 4.9 GHz Licensed Frequency Band
- Exclusive Channels Outside Commercial 2.4 GHz Systems
- 1-54 Mbps Fixed or Auto-Scaling RF Data Rate
- 2 Watts RF Peak Output Power
- Range 5 to 7 Miles Line of Site - Greater Ranges with Unlimited Repeater Hops
- Industrial Hardened Case
- Extended Temperature Specifications
- Direct Pole Mounting
- Redundant, Self-Healing MESH Network Architecture

Wireless Security

- Temporal Key Integrity Protocol (TKIP)
- Access Control List (ACL)
- 128/64 Bit WEP Encryption

Model 195Ep Reduces Site Costs

• New case design. The new case design and weatherproofing kit allows the unit to be indoor or outdoor pole mounted in harsh environments. This feature eliminates the enclosure costs needed with other radios.
• Eliminates costly RF feedlines. By direct pole mounting you eliminate feedline costs.
• Reduces Radio Density in large sites. Eliminating the feedlines not only saves cost, but also increases transmitter-radiated power and received signal strength, giving you greater range. Greater range reduces the number of radios needed to cover large areas.
• Higher RF Power. Higher power means higher signal to noise ratios, which means better coverage in high noise environments and greater range to reduce the number of radios needed to cover large areas.
• External lightning arrestors are not needed on outdoor sites. The Model 195Ep has been designed with an integral lightning arrestor to further save site costs.
• Lower installation costs. The simple pole mounting saves installation time and expense.
• Hardwired backbone not needed. When used in the Access Point with Repeater Mode for large indoor and outdoor sites, substantial costs can be saved by not having to hardwire the Access Points to together

Multiple Modes of Operation

The Model 195Ep can be configured in multiple applications with a single product to fit any wireless Ethernet application. The Model 195Ep can be programmed in one of the following unique modes of operation:

Three Client Modes - The ESTeem can also be configured as a client to greatly increase the range on mobile equipment and vehicles.